Wilier Jena Hybrid e-Bike Mahle X35+ 250Wh, Y8 - Blue/Orange Glossy

Image relating to wheels and groups is for indicative purposes only, may not match to the actual bike assembly.
We advise you to refer to the technical sheet below. For any questions please contact us.

Frame geometry on the attached sheet.

Before proceeding with the purchase, please contact us for availability of your size and chosen set-up.

Bikes will be delivered assembled. However, may need a cycling mechanic for an optimally setup.

KIT Jena Hybrid:
Reference: E122YD0_#001 - Drivetrain Model Shimano GRX 1x11 + MAHLE X35+ - Wheelset Wilier HY-NDR28AC
Reference: E122GF0_#002 - Drivetrain Model Shimano GRX 1x11 + MAHLE X35+ - Wheelset Wilier HY-NDR28AC - flat bar

SIZE: S - M - L - XL

Jena Hybrid has a carbon monocoque frame and fork. The frame’s geometry is similar to the Jena, offering a performance endurance ride combined with a comfortable ride position for long hours spent in the saddle.

The Jena Hybrid features traditional components like hydraulic disc brakes, 11-speed transmission, and carbon or aluminium rims. 

The only component added to the traditional configuration is the rear hub containing the 40 Nm Ebikemotion motor to assist pedalling. The motor is powered by a 250 Wh battery perfectly integrated inside the frame’s down tube. 

System control (on, off, and monitoring) is controlled by the iWoc button installed on the handlebar, allowing the rider to choose Jena Hybrid's various assistance modes.

Usability
There are practically no limits on Jena Hybrid’s usability and the available configurations. The clearance between frame / fork and wheels allows you to install generously sized tires on 28” wheels or 650B MTB wheels. With 28” wheels you can install tires up to 44 mm wide, whereas with 650B MTB wheels, you can install 48 mm wide tires, equivalent to 1.95” (tested on Vittoria tires).

There are numerous available supports that allow the installation of bottle holders, bags, carriers, and mudguards. On the front fork, for example, you can install two bottle holders or one lowrider carrier for bags.

The feel of a normal gravel bike
The motor is positioned inside the hub of the rear wheel so the lower bracket can be sized like that of a regular bicycle. This lets you install standard chainsets. This solution maintains the pedalling sensation of a traditional bicycle.

Improved riding safety
We improved riding safety by installing the iWoc button on the handlebar. The button is installed with a support on the handlebar, so riders can interact with the Ebikemotion system while keeping their hands firmly on the handlebar. On the Jena Hybrid, riders can select the assistance level and check the battery charge while keeping both hands on the top of the handlebar for safe off-road riding.

Motor in rear hub
The drive motor is installed in the rear wheel hub, engaging assistance fluidly and silently. When you stop pedalling, or your speed exceeds 25 km/h, power output stops with no sensation of braking friction.

SETUPS / SPECS

E122YD0 (#001) | Drivetrain Model SHIMANO GRX 1X11 + MAHLE X35+ / WILIER HY-NDR28AC
Drive system: 40Nm
Electric system: MAHLE EBIKEMOTION X35+
Battery: 250Wh, 36V, ANT+ CONNECTIVITY
Display: iWOC
Frame: JENA HY - CARBON MONOCOQUE NH-MOD
Fork: JENA HY - CARBON MONOCOQUE NH-MOD
H-Bar: RITCHEY ERGOMAX ROAD COMP
Stem: RITCHEY COMP
Headset: FSA MR137 TAPERED 1"1/8 TOP - 1"1/4 BOTTOM
Shifters: SHIMANO GRX ST-RX600
Brakes: SHIMANO GRX BR-RX400
Rotors: SHIMANO CENTER LOCK SM-RT70 160 mm / 160 mm
Rear derailleur: SHIMANO GRX RD-RX812
Crankset: SHIMANO GRX FC-RX600-1 40T
Bottom bracket: SHIMANO PRESSFIT BBRS500PB
Cassette: SHIMANO CS-M8000-11 11-42T
Chain: SHIMANO GRX CN-HG601-11 114 LINK
Tyres: VITTORIA TERRENO MIX 700X38
Saddle: SELLE ITALIA MODEL X
Seatpost: RITCHEY COMP 2-BOLT V2 ALU
Axle: THRU AXLE 12X125 FRONT
Weight: 12,700 Kg +/- 5%
Frame weight: 1420 g +/- 5%
Fork weight: 450 g +/- 5%

E122GF0 (#002) | Drivetrain Model SHIMANO GRX 1X11 + MAHLE X35+ / WILIER HY-NDR28AC
Drive system: 40Nm
Electric system: MAHLE EBIKEMOTION X35+
Battery: 250Wh, 36V, ANT+ CONNECTIVITY
Display: iWOC
Frame: JENA HY - CARBON MONOCOQUE NH-MOD
Fork: JENA HY - CARBON MONOCOQUE NH-MOD
Rear shox: RITCHEY FLAT BAR MTN COMP 2X BB BLK
H-Bar: RITCHEY FLAT BAR MTN COMP 2X BB BLK
Stem: RITCHEY COMP
Headset: FSA MR137 TAPERED 1"1/8 TOP - 1"1/4 BOTTOM
Shifters: SHIMANO SLRS700
Brakes: SHIMANO BR-RS405 + BLRS600
Rotors: SHIMANO SM-RT66 6 BOLTS 160 mm / 160 mm
Rear derailleur: SHIMANO GRX RD-RX812
Crankset: SHIMANO GRX FC-RX600-1 40T
Bottom bracket: SHIMANO PRESSFIT BBRS500PB
Cassette: SHIMANO CS-M8000-11 11-42T
Chain: SHIMANO GRX CN-HG601-11 114 LINK
Tyres: VITTORIA TERRENO MIX 700X38
Saddle: SELLE ITALIA MODEL X
Seatpost: RITCHEY COMP 2-BOLT V2 ALU
Axle: THRU AXLE 12X125 FRONT
Weight: 13,00 Kg +/- 5%
Frame weight: 1420 g +/- 5%
Fork weight: 450 g +/- 5%